REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
 |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2.
REMOVE EXHAUST MANIFOLD SUB-ASSEMBLY RH |
 |
(Click here)
| 3.
REMOVE STARTER COVER |
 |
- Remove the 3 bolts and starter cover.
| 4.
REMOVE STARTER ASSEMBLY |
 |
- Disconnect the starter connector.
Remove the nut and disconnect the starter wire.
- Remove the 2 bolts and starter.
- Remove the flywheel housing side cover.