DATA LIST / ACTIVE TEST
System information · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| READ DATA LIST |
- HINT:
- Using the intelligent tester to read the Data List allows values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
- NOTICE:
- In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Data List.
According to the display on the intelligent tester, read the Data List.
Main Body Tester Display
Measurement Item/Range
Normal Condition
Diagnostic Note
D Door Courtesy SW
Driver side door courtesy switch signal / ON or OFF
ON: Driver side door is open
OFF: Driver side door is closed
-
P Door Courtesy SW
Passenger side door courtesy switch signal / ON or OFF
ON: Passenger side door is open
OFF: Passenger side door is closed
-
RL Door Courtesy SW
Rear door courtesy switch LH signal / ON or OFF
ON: Rear side door LH is open
OFF: Rear side door LH is closed
-
RR Door Courtesy SW
Rear door courtesy switch RH signal / ON or OFF
ON: Rear side door RH is open
OFF: Rear side door RH is closed
-
Back Door Courtesy SW
Back door courtesy switch signal / ON or OFF
ON: Back door is open
OFF: Back door is closed
-
D Lock Pos switch
Driver side door lock position switch signal / ON or OFF
ON: Driver side door lock is unlocked
OFF: Driver side door lock is locked
-
P Lock Pos switch
Passenger side door lock position switch signal / ON or OFF
ON: Passenger side door is unlocked
OFF: Passenger side door is locked
-
RL Lock Pos switch
Rear door LH lock position switch signal / ON or OFF
ON: Rear side door LH is unlocked
OFF: Rear side door LH is locked
-
RR Lock Pos switch
Rear door RH lock position switch signal / ON or OFF
ON: Rear side door RH is unlocked
OFF: Rear side door RH is locked
-
Back Lock Pos switch
Back door lock position switch signal / ON or OFF
ON: Back door is unlocked
OFF: Back door is locked
-
| ACTIVE TEST |
- HINT:
- Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Main Body / Active Test.
According to the display on the intelligent tester, perform the Active Test.
Main Body Tester Display
Test Part
Control Range
Diagnostic Note
Hazard
Turn signal flasher relay
ON or OFF
-
Door Lock
All door lock motors
OFF or LOCK
-
D-Door Unlock
Driver side door unlock motor
OFF or UNLOCK
-