P0630 VIN not Programmed or Mismatch - ECM / PCM
Diagnostic trouble codes · Vehicles built from Jan 2012
DESCRIPTION
DTC P0630 is set when the Vehicle Identification Number (VIN) is not stored in the ECM or the input VIN is not accurate. Input the VIN with the GTS.| DTC No. |
DTC Detection Condition |
Trouble Area |
| P0630 |
VIN not stored in ECM or VIN input into ECM not accurate (1 trip detection logic) |
ECM |
INSPECTION PROCEDURE
| 1. CHECK ANY OTHER DTCS OUTPUT (IN ADDITION TO DTC P0630) |
Connect an GTS to the DLC3.
Turn the engine switch on (IG) and turn the GTS ON.
Enter the following menus: Engine and ECT / Trouble Codes.
Read DTCs.
- Result:
Display (DTC Output)
Proceed To
P0630
A
P0630 and other DTCs
B
- NOTICE:
- If P0630 is set, the VIN must be input to the ECM using the GTS. However, all DTCs are cleared automatically by the GTS when inputting the VIN. If DTCs other than P0630 are set, check them first.
|
|
||||
| A | |
| 2. INPUT VIN WITH GTS |
Refer to the REGISTRATION (Click here).
| NEXT | ||
| ||
