2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSTALLATION

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedures for the RHD and LHD.
  2. The procedures listed below are the LHD side.


1. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY

  1. B189612E01
    Attach the 5 hooks (A).

  1. Attach the 5 hooks (B) to install the front passenger airbag on the instrument panel.

  1. B189610E01
    Install the 2 screws.

  1. B183441
    Connect the 2 connectors and install the instrument panel wire assembly to the front passenger airbag.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Attach the claw and install the wire.


2. INSTALL INSTRUMENT PANEL SAFETY PAD
  1. Install the instrument panel safety pad (Click here).


3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


4. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).

← REMOVAL (from Jan 2012)INSTALLATION (from Jan 2012) →