2011-2013 Land Cruiser · Service Manual Vehicle Interior

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CHECK REAR SEAT SIDE AIRBAG ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)

  1. B181635
    Perform a diagnostic system check (Click here).

  1. With the rear seat side airbag installed on the vehicle, perform a visual check. If there are any defects as mentioned below, replace the rear seat with a new one:
    Cuts, minute cracks or marked discoloration on the rear seatback around the rear seat side airbag.


CHECK REAR SEAT SIDE AIRBAG ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)

  1. C107069
    Perform a diagnostic system check (Click here).

  1. With the rear seat side airbag removed from the vehicle, perform a visual check. If there are any defects as mentioned below, replace the rear seat side airbag with a new one:

    1. Cuts, minute cracks or marked discoloration on the rear seat side airbag.
    2. Cracks or other damage to the wire harness or connector.

    NOTICE:
    For removal and installation procedures of the rear seat side airbag, be sure to follow the correct procedure.

← ON-VEHICLE INSPECTION (Sep 2011 – Dec 2011)DISPOSAL (Sep 2011 – Dec 2011) →