2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REPAIR

Removal / installation · Vehicles built from Jan 2012


1. REPAIR INTAKE VALVE SEAT

NOTICE:
  1. Repair the intake valve seat while checking the seating position.
  2. Keep the lip free of foreign matter.
  3. Take off the cutter gradually to make the intake valve seat smooth.

  1. A145575
    Using a 45° cutter, resurface the valve seat so that the valve seat width is more than the specification.

  1. A124254E06
    Using 30° and 60° cutters, correct the valve seat so that the intake valve contacts the entire circumference of the seat. The contact should be in the center of the intake valve seat, and the intake valve seat width should be maintained within the specified range around the entire circumference of the intake valve seat.

    Standard width:
    1.1 to 1.5 mm (0.0433 to 0.0591 in.)

    Text in Illustration 
    *1
    Width

  1. Hand-lap the intake valve and intake valve seat with an abrasive compound.

  1. Check the intake valve seating position.


2. REPAIR EXHAUST VALVE SEAT

NOTICE:
  1. Repair the seat while checking the seating position.
  2. Keep the lip free of foreign matter.
  3. Take off the cutter gradually to make the exhaust valve seat smooth.

  1. A145576
    Using a 45° cutter, resurface the valve seat so that the valve seat width is more than the specification.

  1. A124255E08
    Using 30° and 60° cutters, correct the exhaust valve seat so that the exhaust valve contacts the entire circumference of the seat. The contact should be in the center of the exhaust valve seat, and the exhaust valve seat width should be maintained within the specified range around the entire circumference of the exhaust valve seat.

    Standard width:
    1.1 to 1.5 mm (0.0433 to 0.0591 in.)

    Text in Illustration 
    *1
    Width

  1. Hand-lap the exhaust valve and exhaust valve seat with an abrasive compound.

  1. Check the exhaust valve seating position.

← REASSEMBLY (from Jan 2012)COMPONENTS (from Jan 2012) →