2011-2013 Land Cruiser · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011


1. REMOVE REAR SIDE SEAT LEG PROTECTOR LH (for Face to Face Seat Type)

B182655
  1. Using a screwdriver, detach the 2 claws and remove the protector.

    HINT:
    Tape the screwdriver tip before use.


2. REMOVE REAR NO. 2 SEAT ASSEMBLY (for Face to Face Seat Type)

B182647
  1. Remove the 4 bolts and rear No. 2 seat.


3. REMOVE REAR NO. 2 SEAT HEADREST ASSEMBLY LH (except Face to Face Seat Type)

4. REMOVE REAR SEAT CUSHION HINGE COVER LH (except Face to Face Seat Type)

  1. B235507
    Operate the rear seat headrest handle and lower the headrest.

  1. B181807
    Operate the reclining adjuster release handle and fold down the seat.

  1. B181808
    Operate the seat cushion lock release lever and move the seat to the storage position.

  1. B181809
    Using a screwdriver, detach the 3 claws and remove the cover.

    HINT:
    Tape the screwdriver tip before use.


5. REMOVE REAR NO. 2 SEAT HINGE COVER LH (except Face to Face Seat Type)

B181810
  1. Detach the 2 claws and clip, and then remove the cover.


6. REMOVE REAR NO. 2 SEAT ASSEMBLY (except Face to Face Seat Type)

B181811
  1. Remove the 4 bolts and seat assembly.

    NOTICE:
    Be careful not to damage the vehicle body.


7. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

B181672
  1. Detach the 6 clips and remove the support plate.


8. REMOVE REAR STEP COVER

B181673

HINT:
Use the same procedure to remove the step cover on the other side.

  1. Detach the 2 claws and remove the step cover.


9. REMOVE REAR DOOR SCUFF PLATE LH

B181674
  1. Remove the screw.

  1. Detach the 3 claws and 4 clips, and remove the scuff plate.


10. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/ Tonneau Cover)

B186439

HINT:
Use the same procedure to remove the tonneau cover holder cap on the other side.

  1. Detach the 2 claws and remove the tonneau cover holder cap.


11. REMOVE REAR SEAT COVER CAP (w/ Rear No. 2 Seat)

B190187E01

HINT:
Use the same procedure to remove the rear seat cover cap on the other side.

  1. Using a screwdriver, detach the 3 claws and remove the rear seat cover cap.

    HINT:
    Tape the screwdriver tip before use.


12. REMOVE FRONT QUARTER TRIM PANEL ASSEMBLY LH

B182644

HINT:
When removing the front quarter trim panel, operate the reclining adjuster release handle and move the No. 1 rear seat to the position shown in the illustration.

  1. B181687
    Detach the 3 claws and remove the cover.

  1. B181689
    Remove the bolt and rear No. 1 seat belt anchor.

  1. B181691
    w/ Rear No. 2 Seat, except Face to Face Seat Type:
    Remove the bolt and rear No. 2 seat belt anchor.

  1. w/ Rear No. 2 Seat, except Face to Face Seat Type:

    1. Remove the clip and bolt.

    2. Detach the 18 clips and 2 claws.

    3. w/o Rear Air Conditioning System:
      Disconnect the rear seat lock control lever cable and then remove the quarter trim panel.

    4. w/ Rear Air Conditioning System:
      Disconnect the thermistor connector and rear seat lock control lever cable, and then remove the quarter trim panel.

      B186889

  1. w/o Rear No. 2 Seat or w/ Rear No. 2 Seat, for Face to Face Seat Type:

    1. Remove the clip.

    2. Detach the 18 clips and 2 claws, and remove the quarter trim panel.

      B190221


13. REMOVE SELF POWER SIREN ASSEMBLY

B180866
  1. Disconnect the connector.

  1. Remove the 2 bolts and siren.

← COMPONENTS (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →