2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

DTC CHECK / CLEAR

Troubleshooting · Vehicles built from Jan 2012


CHECK DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.

  5. Read the DTCs.


CLEAR DTC
  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Powertrain / Radar Cruise / Trouble Codes.

  5. Clear the DTCs.

← DIAGNOSIS SYSTEM (from Jan 2012)FAIL-SAFE CHART (from Jan 2012) →