2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT EGR VALVE ASSEMBLY

  1. A165499E04
    Check the EGR valve position sensor.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 (+B) - 5 (EGR)
      20°C (68°F)
      6.5 to 7.5 Ω
      3 (VC) - 2 (E2)
      Always
      2.45 to 4.55 kΩ

      HINT:
      The temperature indicated under "Condition" is the temperature of the EGR valve assembly.

      If the result is not as specified, replace the EGR valve assembly.

← REMOVAL (from Jan 2012)INSTALLATION (Sep 2011 – Dec 2011) →