REASSEMBLY
Removal / installation · Vehicles built from Sep 2011
| 1. INSTALL OIL PUMP RELIEF VALVE |
Coat the oil pump relief valve with engine oil.
Install the relief valve and relief valve spring into the oil pump cover hole.
Install the plug.
- Torque:
- 53 N*m{ 540 kgf*cm , 39 ft.*lbf }
| 2. INSTALL OIL PUMP COVER |
Install the driven rotor, drive rotor and oil pump cover with the 13 bolts.
- Torque:
- 10 N*m{ 105 kgf*cm , 8 ft.*lbf }
