REMOVAL
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedures for the LH side and RH side.
- The procedures listed below are for the LH side.
- Use the same procedures for the LH side and RH side.
| 1. REMOVE REAR DOOR ARMREST BASE PANEL ASSEMBLY |
Using a moulding remover, detach the 7 claws.

Disconnect the connector and remove the armrest base panel.
| 2. REMOVE REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY |
Detach the 2 claws and remove the regulator switch.

