2011-2013 Land Cruiser · Service Manual Vehicle Interior

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built from Sep 2011


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the engine switch on (IG).

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Utility / Customize.

  5. Select the setting by referring to the table below.

    Security: 
    Display
    Default
    Contents
    Setting
    Warning by Horn*1
    ON
    Function that allows vehicle horns and security horn to be used as warning device.
    ON/OFF
    Warning by Glass Broken Sensor*2
    ON
    Function that turns the glass breakage sensor on/off.
    ON/OFF

    HINT:
    1. *1: w/ Security Horn
    2. *2: w/ Glass Breakage Sensor

← OPERATION CHECK (from Sep 2011)PROBLEM SYMPTOMS TABLE (Sep 2011 – Dec 2011) →