2011-2013 Land Cruiser · Service Manual Vehicle Interior

CUSTOMIZE PARAMETERS

Troubleshooting · Vehicles built from Sep 2011


CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE)

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Utility / Customize.

  5. Select the setting by referring to the table below.

    Security 
    Display
    Default
    Contents
    Setting
    Warning by Horn
    ON
    Function that allows the vehicle horns and security horn to be used as warning devices.
    ON/OFF

← OPERATION CHECK (from Jan 2012)PROBLEM SYMPTOMS TABLE (Sep 2011 – Dec 2011) →