REMOVAL
Removal / installation · Vehicles built from Sep 2011
| 1. REMOVE FRONT NO. 2 EXHAUST PIPE ASSEMBLY |
Disconnect the sensor connector.

Remove the 2 bolts, 2 nuts and No. 2 exhaust pipe assembly.

Remove the 2 gaskets from the front No. 2 exhaust pipe.
| 2. REMOVE HEATED OXYGEN SENSOR (for Bank 1 Sensor 2) |
Disconnect the sensor connector.

Using SST, remove the sensor.

- SST
- 09224-00010
| 3. REMOVE HEATED OXYGEN SENSOR (for Bank 2 Sensor 2) |
Using SST, remove the sensor.

- SST
- 09224-00010
