REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
| 1. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH |
![]() ![]() |
Remove the 3 bolts and screw.
Turn the clip indicated by the arrow in the illustration to remove the fender splash shield.
| 2. REMOVE FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH |
- HINT:
- Use the same procedures described for the LH side.
| 3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY |
Remove the 10 bolts and No. 1 engine under cover.

| 4. REMOVE OIL PRESSURE SENDER GAUGE ASSEMBLY |
Disconnect the sender gauge connector.

Remove the sender gauge.

