REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE V-BANK COVER SUB-ASSEMBLY |
Remove the 2 nuts and V-bank cover.

| 3. REMOVE PURGE VSV |
![]() ![]() |
Disconnect the purge VSV connector.
Disconnect the 2 purge line hoses.
Remove the bolt and purge VSV.

