2011-2013 Land Cruiser · Service Manual Vehicle Interior

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


CHECK CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION)
  1. Perform a diagnostic system check (Click here).


CHECK CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED)
  1. Perform a diagnostic system check (Click here).


CHECK CENTER AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED)
  1. Replace the center airbag sensor.

    CAUTION:
    For removal and installation procedures of the center airbag sensor, be sure to follow the correct procedure.

    HINT:
    The center airbag sensor should be replaced after any of the airbags have deployed, as it has been subjected to the impact.

← ON-VEHICLE INSPECTION (Sep 2011 – Dec 2011)REMOVAL (Sep 2011 – Dec 2011) →