REPAIR
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1.
REPAIR VALVE SPRING SEAT |
 |
- If the seating is too high to the valve face, use 30° and 45° cutters to correct the seat.
- Intake Side:
If the seating is too low to the valve face, use 60° and 45° cutters to correct the seat.
- Exhaust Side:
If the seating is too low to the valve face, use 75° and 45° cutters to correct the seat.
- Hand-lap the valve and valve seat with an abrasive compound.
After lapping the valve by hand, clean the valve and valve seat.