INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. INSTALL FUEL PUMP ECU |
Install the fuel pump ECU with the 2 bolts.
- Torque:
- 31 N*m{ 316 kgf*cm , 23 ft.*lbf }
- NOTICE:
- Do not use the fuel pump ECU if it has been subjected to physical shocks such as being dropped, etc.
Connect the fuel pump ECU connector.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
