2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL FUEL PUMP ECU BRACKET
  1. Install the fuel pump ECU bracket with the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }


2. INSTALL FUEL PUMP ECU

  1. A274076E01
    Install the fuel pump ECU with the bolt.

    Torque:
    31 N*m{ 316 kgf*cm , 23 ft.*lbf }

    NOTICE:
    Do not use the fuel pump ECU if it has been subjected to physical shocks, such as being dropped, etc.

  1. Connect the fuel pump ECU connector.

    1. Connect the fuel pump ECU connector.*1

    2. Rotate the lever in the direction of the arrow until a "click" sound is heard.*2

← INSTALLATION (Sep 2011 – Dec 2011)COMPONENTS (Sep 2011 – Dec 2011) →