REMOVAL
Removal / installation · Vehicles built Sep 2011 – Dec 2011
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
| 2. REMOVE FUEL PUMP ECU |
Disconnect the fuel pump ECU connector.

Remove the 2 bolts and fuel pump ECU.
- NOTICE:
- Make sure the fuel pump ECU is not subjected to physical shocks such as being dropped, etc.
