2011-2013 Land Cruiser · Service Manual Vehicle Exterior

SYSTEM DESCRIPTION

Troubleshooting · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


GENERAL
The defogger system thin heater wires are attached to the rear window and defog the rear window surface quickly. The indicator light illuminates while the system is operating. The system automatically turns off after approximately 15 minutes.

FUNCTION OF MAIN COMPONENT
Component
Outline
Defogger switch
Located on the air conditioning control assembly*1 or multi-display assembly*2, it detects defogger switch operation and transmits signals to the air conditioning amplifier assembly through the LIN communication line*1 or CAN communication line and UART communication line*2.
Defogger relay
Receives rear window defogger activation request signals from the air conditioning amplifier assembly and supplies power to the rear window defogger.
Rear window defogger
Receives power from the defogger relay and heats the defogger wire.

HINT:
*1: w/o Navigation System
*2: w/ Navigation System


DESCRIPTION
Function
Outline
Defog rear window surface
  1. The defogger relay receives rear window defogger activation request signals from the air conditioning amplifier assembly and defogs the rear window surface.
  1. Receives power from the defogger relay and heats the defogger wire.
← SYSTEM DESCRIPTION (Sep 2011 – Dec 2011)HOW TO PROCEED WITH TROUBLESHOOTING (Sep 2011 – Dec 2011) →