2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT UNLOCK WARNING SWITCH ASSEMBLY

E178151E08
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (UN+) - 2 (UN-)
    Not pushed
    10 kΩ or higher
    Pushed
    Below 1 Ω

    If the result is not as specified, replace the unlock warning switch assembly.
    Text in Illustration 
    *a
    Not Pushed
    *b
    Pushed
    *c
    Component without harness connected
    (Unlock Warning Switch Assembly)

← REMOVAL (from Jan 2012)INSTALLATION (Sep 2011 – Dec 2011) →