INSPECTION
Inspection · Vehicles built from Sep 2011
| INSPECT TRANSMISSION CONTROL SWITCH |
![]() ![]() |
Measure the resistance according to the value(s) in the table below.
- Standard Resistance:
Tester Connection
Condition
Specified Condition
3 (IG) - 7 (S)
Shift lever in S, "+" or "-"
Below 1 Ω
2 (SFTU) - 5 (E)
Shift lever held in "+" (Up-shift)
1 (SFTD) - 5 (E)
Shift lever held in "-" (Down-shift)
3 (IG) - 7 (S)
Shift lever not in S, "+" or "-"
10 kΩ or higher
2 (SFTU) - 5 (E)
Shift lever in S
1 (SFTD) - 5 (E)


