INSTALLATION
Removal / installation · Vehicles built Sep 2011 – Dec 2011
| 1. INSTALL AIR INJECTION CONTROL DRIVER ASSEMBLY |
Install the air injection control driver assembly with the 3 bolts.

- Torque:
- 8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
Connect the wire harness clamp.

Connect the wire harness with the bolt.
- Torque:
- 5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
Connect the 2 air injection control driver connectors.
| 2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |
- NOTICE:
- When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).
