2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSTALLATION

Removal / installation · Vehicles built from Jan 2012


1. INSTALL AIR INJECTION CONTROL DRIVER WITH BRACKET
  1. Install the air injection control driver assembly with the 3 bolts.

    Torque:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }

  1. Connect the wire harness with the bolt.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

  1. Attach the wire harness clamp.

  1. Connect the 2 connectors.

← REASSEMBLY (from Jan 2012)COMPONENTS (from Sep 2011) →