2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011


1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).


2. REMOVE AIR INJECTION CONTROL DRIVER ASSEMBLY

  1. A180578
    Disconnect the 2 air injection control driver connectors.

  1. Remove the bolt and disconnect the wire harness.

  1. Disconnect the wire harness clamp.

  1. A180579
    Remove the 3 bolts and air injection control driver assembly.

← COMPONENTS (Sep 2011 – Dec 2011)DISASSEMBLY (Sep 2011 – Dec 2011) →