2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

ON-VEHICLE INSPECTION

Inspection · Vehicles built Sep 2011 – Dec 2011


CHECK MASS AIR FLOW METER

  1. Check the mass air flow value.

    1. Connect the intelligent tester the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Powertrain / Engine / Data List / All Data / MAF.

    5. A165593E01
      Blow air into the MAF meter, and check that the MAF value fluctuates.
      If the result is not as specified, check the MAF meter (Click here), or wiring and ECM (Click here).

← COMPONENTS (Sep 2011 – Dec 2011)REMOVAL (Sep 2011 – Dec 2011) →