2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


INSPECT COMMON RAIL ASSEMBLY RH

  1. Inspect the fuel pressure sensor.

    1. A168059E02
      Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      25°C (77°F)
      16.4 kΩ or less
      2 - 3
      25°C (77°F)
      3 kΩ or less

      Text in Illustration 
      *a
      Component without harness connected
      (Fuel Pressure Sensor)
      If the result is not as specified, replace the common rail assembly RH.


INSPECT COMMON RAIL ASSEMBLY LH (w/ DPF)
  1. Inspect the pressure discharge valve.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      0.96 to 1.16 Ω

      If the result is not as specified, replace the common rail assembly LH.

← INSPECTION (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →