2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT FUEL FILTER ASSEMBLY

  1. Inspect the level warning switch.

    1. A181380E01
      Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Float upper end position
      Below 1 Ω
      1 - 2
      Float lower end position
      1 MΩ or higher

      If the result is not as specified, replace the fuel filter assembly.

  1. Inspect the clogging switch.

    1. A181381E01
      Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      20°C (68°F)
      Below 1 Ω

      If the result is not as specified, replace the fuel filter assembly.

← COMPONENTS (from Sep 2011)REPLACEMENT (from Sep 2011) →