2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT OIL REGULATOR ASSEMBLY

A161982
  1. Remove the oil pump relief valve plug.

  1. Remove the 2 valve springs and relief valve.

  1. A161983
    Check that the valve falls smoothly into the valve hole by its own weight.
    If it does not, replace the relief valve. If necessary, replace the oil regulator assembly.

  1. Coat the relief valve with engine oil.

  1. A161982
    Install the relief valve and 2 relief valve springs into the oil regulator body hole.

  1. Install the oil pump relief valve plug.

    Torque:
    50 N*m{ 510 kgf*cm , 37 ft.*lbf }


INSPECT OIL PUMP ASSEMBLY

A161988
  1. Turn the gear and check that the oil pump bearing moves smoothly and quietly.
    If necessary, replace the oil pump assembly.

← REMOVAL (from Jan 2012)INSTALLATION (Sep 2011 – Dec 2011) →