2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Jan 2012


CHECK MASS AIR FLOW METER SUB-ASSEMBLY

  1. Check the mass air flow value.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Powertrain / Engine / Data List / Primary / MAF.

    5. A204312
      Blow air into the mass air flow meter and check that the mass air flow value fluctuates.
      If the result is not as specified, check the wiring and ECM (Click here).

← COMPONENTS (from Jan 2012)REMOVAL (from Jan 2012) →