REMOVAL
Removal / installation · Vehicles built from Sep 2011
| 1.
REMOVE V-BANK COVER SUB-ASSEMBLY
|
 |
- Raise the front of the V-bank cover to detach the 3 pins. Then remove the 2 V-bank cover hooks from the bracket, and remove the V-bank cover.
Text in Illustration
*1
|
Bracket
|
*2
|
Hook
|
*3
|
Pin
|
*4
|
Grommet
|
| 2.
REMOVE AIR CLEANER HOSE ASSEMBLY
|
 |
- Disconnect the vacuum hose and No. 2 ventilation hose.
Loosen the 2 hose clamps.
Remove the air cleaner hose.
| 3.
REMOVE CAMSHAFT POSITION SENSOR |
 |
Disconnect the sensor connector.
Remove the bolt and sensor.
| 4.
REMOVE VVT SENSOR |
 |
- Disconnect the 4 sensor connectors.
Remove the 4 bolts and 4 sensors.
Text in Illustration
*A
|
for Bank 2
|
*B
|
for Bank 1
|