2011-2013 Land Cruiser · Service Manual Engine / Hybrid / EV System

ON-VEHICLE INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT OIL PRESSURE SENDER GAUGE ASSEMBLY

  1. A163798E04
    Disconnect the oil pressure sender gauge connector.

  1. Apply battery positive (+) voltage to the oil pressure sender gauge terminal through a test LED.

  1. Check that the LED does not illuminate when the engine is stopped.

  1. Check that the oil pressure sender gauge operation.

    OK:
    Condition
    Specified Condition
    Engine stopped
    LED does not illuminate
    Engine is running
    Number of flashes varies with engine speed

    If the result is not as specified, replace the oil pressure sender gauge assembly.

← COMPONENTS (from Jan 2012)REMOVAL (Sep 2011 – Dec 2011) →