REMOVAL
Removal / installation · Vehicles built from Sep 2011
| 1. DRAIN CLUTCH FLUID |
| 2. REMOVE NO. 1 CLUTCH HOUSING COVER |
![]() ![]() |
Remove the 3 bolts and housing cover.
| 3. REMOVE CLUTCH RELEASE CYLINDER TO ACCUMULATOR TUBE |
![]() ![]() |
Using a union nut wrench, disconnect the tube.
- HINT:
- Use a container to catch the fluid.
Remove the 2 bolts and tube.
| 4. REMOVE CLUTCH ACCUMULATOR ASSEMBLY |
![]() ![]() |
Using a union nut wrench, disconnect the flexible hose tube.
- HINT:
- Use a container to catch the fluid.
Remove the 3 bolts and clutch accumulator.




