2011-2013 Land Cruiser · Service Manual General

SERVICE DATA

Specifications · Vehicles built from Sep 2011

Oil Pressure 
Condition
Specified Condition
Idle
50 kPa (0.5 kgf/cm2, 7.3 psi) or more
2500 rpm
230 kPa (2.3 kgf/cm2, 33 psi) or more
Oil Pressure Sender Gauge 
Test LED Connection
Condition
Specified Condition
Apply battery positive (+) voltage to the oil pressure sender gauge terminal through a test LED.
Engine stopped
LED does not illuminate
Engine is running
Number of flashes varies with engine speed
Oil Level Sensor 
Tester Connection
Switch Condition
Specified Condition
1 - 2
ON at 60°C (140°F)
Below 1 Ω
1 - 2
OFF at 60°C (140°F)
10 kΩ or higher
← TORQUE SPECIFICATIONS (Sep 2011 – Dec 2011)TORQUE SPECIFICATIONS (from Sep 2011) →