2011-2013 Land Cruiser · Service Manual Vehicle Interior

REMOVAL

Removal / installation · Vehicles built Sep 2011 – Dec 2011

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. REMOVE TRANSMITTER BATTERY

NOTICE:
Take extra care when handling these precision electronic components.

HINT:
  1. Type A: for Australia.
  2. Type B: except Australia.

  1. B107849
    Push the release hook knob and extract the emergency key.

  1. B107851
    Insert a precision screwdriver into the gap, and turn the screwdriver to detach the transmitter housing cover.

    NOTICE:
    When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

    HINT:
    Tape the screwdriver tip before use.

  1. B192056E01
    Remove the battery (lithium battery: CR1632).

    NOTICE:
    1. When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.
    2. Do not push the terminals with your finger.
    3. Do not forcibly pry up the battery. The terminals may be damaged.
    4. Do not touch the battery with wet hands. Water may cause rust.
    5. Do not touch or move any components inside the transmitter. It may interfere with proper operation.

← COMPONENTS (from Jan 2012)REMOVAL (from Jan 2012) →