2011-2013 Land Cruiser · Service Manual Vehicle Exterior

REASSEMBLY

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012


1. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/o Dynamic Radar Cruise Control System)

HINT:
When installing the radiator grille emblem, heat the radiator grille and radiator grille emblem using a heat light.

Standard:
Item
Temperature
Radiator Grille
20 to 30°C (68 to 86°F)
Radiator Grille Emblem
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the radiator grille and radiator grille emblem excessively.

  1. Clean the radiator grille surface.

    1. Using a heat light, heat the radiator grille surface.

    2. Remove the double-sided tape from the radiator grille.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new radiator grille emblem.

    1. Using a heat light, heat the radiator grille and a new radiator grille emblem.

    2. Remove the peeling paper from the face of the radiator grille emblem.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. B302194E01
      Align the boss positions and install the radiator grille emblem.
      Text in Illustration 
      *1
      Boss

      HINT:
      Press the radiator grille emblem firmly to install it.


2. INSTALL RADIATOR GRILLE (OR FRONT PANEL) EMBLEM (w/ Dynamic Radar Cruise Control System)
  1. Attach the claw to install the radiator grille emblem.

  1. Install 3 new spring nuts.


3. INSTALL UPPER RADIATOR SEAL
  1. Attach the 14 clips to install the upper radiator seal.


4. INSTALL FRONT TELEVISION CAMERA ASSEMBLY (w/ Wide View Front Monitor System)
← REASSEMBLY (Sep 2011 – Dec 2011)INSTALLATION (Sep 2011 – Dec 2011) →