INSTALLATION
Removal / installation · Vehicles built from Jan 2012
Versions by build date: Sep 2011 – Dec 2011 from Jan 2012
- HINT:
- A bolt without a torque specification is shown in the standard bolt chart (Click here).
| 1. INSTALL REAR SPOILER SUB-ASSEMBLY |
Attach the 3 clips to install the rear spoiler sub-assembly.
w/ Power Back Door:
Install the 4 bolts and 2 hole plugs.
w/o Power Back Door:
Install the 4 bolts.
| 2. INSTALL BACK DOOR GLASS CHANNEL LH (w/o Power Back Door) |
![]() ![]() |
Attach the clip and install the back door glass channel.
| 3. INSTALL BACK DOOR GLASS CHANNEL RH (w/o Power Back Door) |
![]() ![]() |
Attach the clip and install the back door glass channel.
| 4. INSTALL CENTER BACK DOOR GARNISH |
Attach the 5 clips and 4 claws to install the center back door garnish.



