REMOVAL
Removal / installation · Vehicles built from Sep 2011
- HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- Use the same procedures for the RH side and LH side.
| 1. REMOVE FRONT FENDER MUDGUARD LH |
![]() ![]() |
Remove the clip.
Using a T30 "TORX" socket, remove the 4 screws and mudguard.
| 2. REMOVE SIDE STEP ASSEMBLY LH |
Remove the 6 bolts and side step.


| 3. REMOVE BODY ROCKER PANEL MOULDING ASSEMBLY LH |
Remove the 8 side mudguard retainers and screw.
Detach the 10 clips and remove the rocker panel moulding.



