REMOVAL
Removal / installation · Vehicles built from Sep 2011
| 1. REMOVE FRONT FENDER MUDGUARD LH |
![]() ![]() |
Remove the clip.
Using a T30 "TORX" socket, remove the 4 screws and mudguard.
| 2. REMOVE FRONT FENDER MUDGUARD RH |
- HINT:
- Use the same procedures described for the LH side.
| 3. REMOVE REAR QUARTER PANEL MUDGUARD LH |
![]() ![]() |
Remove the clip.
Using a T30 "TORX" socket, remove the 6 screws and mudguard.
| 4. REMOVE REAR QUARTER PANEL MUDGUARD RH |
![]() ![]() |
Remove the clip.
Using a T30 "TORX" socket, remove the 7 screws and mudguard.




