2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Sep 2011

HINT:
When installing the back door garnish, heat the vehicle body and back door garnish using a heat light.

Standard Heating Temperature:
Item
Temperature
Back Door Garnish
20 to 30°C (68 to 86°F)
Vehicle Body
40 to 60°C (104 to 140°F)

NOTICE:
Do not heat the back door garnish and vehicle body excessively.


1. INSTALL BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE
  1. Clean the vehicle body surface.

    1. Using a heat light, heat the vehicle body surface.

    2. Remove the double-sided tape from the vehicle body surface.

    3. Wipe off any tape adhesive residue with cleaner.

  1. Install a new back door garnish.

    1. Using a heat light, heat a new back door garnish and the vehicle body surface.

    2. Remove the peeling paper from the face of the back door garnish.

      HINT:
      After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    3. Attach the 4 clips and double-sided tape to install the back door garnish.

      HINT:
      Press the back door garnish firmly to install it.


      B181926E01

← REMOVAL (from Sep 2011)COMPONENTS (from Sep 2011) →