2011-2013 Land Cruiser · Service Manual Suspension

DISPOSAL

Removal / installation · Vehicles built from Sep 2011


1. DISPOSE OF REAR SHOCK ABSORBER ASSEMBLY LH
  1. Fully extend the rear shock absorber rod.

  1. C174046E01
    Using a drill, make a hole in the cylinder between A and B shown in the illustration to discharge the gas inside.

    CAUTION:
    Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.

    NOTICE:
    The gas is colorless, odorless and nonpoisonous.

← INSTALLATION (from Sep 2011)COMPONENTS (from Sep 2011) →