INSTALLATION
Removal / installation · Vehicles built from Sep 2011
- HINT:
- When only replacing the room light bulb, use the following procedures.
| 1. INSTALL NO. 1 ROOM LIGHT BULB (w/o Rear Seat Entertainment System) |
Install the bulb.

Attach the 4 claws to install the light lens.

| 2. INSTALL NO. 1 ROOM LIGHT ASSEMBLY (w/ Rear Seat Entertainment System) |
Install the 2 bulbs.

| 3. INSTALL NO. 1 ROOF LINING TRIM COVER (w/ Rear Seat Entertainment System) |
Attach the 4 claws to install the room light trim cover.

| 4. INSTALL NO. 2 ROOF LINING TRIM COVER (w/ Rear Seat Entertainment System) |
Attach the 4 claws to install the room light trim cover.

