2011-2013 Land Cruiser · Service Manual Vehicle Interior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT VISOR ASSEMBLY RH

  1. E144193E03
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    2 (SW) - 1 (GND)
    Visor raised
    10 kΩ or higher
    2 (SW) - 1 (GND)
    Visor lowered and mirror cover closed
    10 kΩ or higher
    2 (SW) - 1 (GND)
    Visor lowered and mirror cover open
    Below 1 Ω

    If the result is not as specified, there may be a malfunction in the visor assembly.


INSPECT VISOR ASSEMBLY LH

  1. E144193E03
    Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    2 (SW) - 1 (GND)
    Visor raised
    10 kΩ or higher
    2 (SW) - 1 (GND)
    Visor lowered and mirror cover closed
    10 kΩ or higher
    2 (SW) - 1 (GND)
    Visor lowered and mirror cover open
    Below 1 Ω

    If the result is not as specified, there may be a malfunction in the visor assembly.

← REMOVAL (from Sep 2011)INSTALLATION (from Sep 2011) →