2011-2013 Land Cruiser · Service Manual
Vehicle Exterior
Home
›
Vehicle Exterior
› LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT ASSEMBLY (for Front Fender)
REMOVAL
Removal / installation
·
Vehicles built from Sep 2011
HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1. REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH
Detach the 2 claws in the order shown in the illustration and remove the side turn signal light.
Disconnect the connector.
← COMPONENTS (from Sep 2011)
INSTALLATION (from Sep 2011) →