2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL REAR TURN SIGNAL LIGHT BULB

  1. E244784
    Install the rear turn signal light bulb to the socket.

  1. Turn the socket in the direction indicated by the arrow in the illustration to install the socket.

  1. Attach the clamp.


2. INSTALL REAR COMBINATION LIGHT GASKET LH
  1. Install the rear combination light gasket LH to the rear combination light lens and body LH.


3. INSTALL REAR COMBINATION LIGHT ASSEMBLY LH
  1. Connect the connector.

  1. Attach the 2 clips to install the rear combination light assembly LH.

  1. Install the 2 bolts.

  1. Attach the 6 claws and install the 2 covers.

← INSTALLATION (Sep 2011 – Dec 2011)COMPONENTS (from Sep 2011) →