2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT REAR COMBINATION LIGHT ASSEMBLY LH

  1. E157008E01
    Check the stop light.

    1. Apply battery voltage to the connector, and check the LED illumination condition.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 4 (STOP)
      Battery negative (-) → 6 (E)
      Light illuminates

      If the result is not as specified, replace the rear combination light assembly.

  1. E157008E02
    Check the taillight.

    1. Apply battery voltage to the connector, and check the LED illumination condition.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 3 (TAIL)
      Battery negative (-) → 6 (E)
      Light illuminates

      If the result is not as specified, replace the rear combination light.

← DISASSEMBLY (Sep 2011 – Dec 2011)REASSEMBLY (Sep 2011 – Dec 2011) →