2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSTALLATION

Removal / installation · Vehicles built from Jan 2012

Versions by build date: Sep 2011 – Dec 2011 from Jan 2012

HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.


1. INSTALL REAR LIGHT SOCKET AND WIRE LH
  1. Connect the connector.

  1. Install the rear light socket and wire LH to the rear light lens and body LH.


2. INSTALL BACK UP LIGHT BULB

  1. E244790
    Install the back up light bulb to the rear light socket and wire LH.

  1. Turn the rear light socket and wire LH in the direction indicated by the arrow in the illustration to install the socket.

  1. Attach the clamp.


3. INSTALL REAR LIGHT COVER
  1. Attach the 2 claws, guide and install the rear light cover to the rear light lens and body LH.


4. INSTALL REAR LIGHT GASKET LH
  1. Install the rear light gasket LH to the rear light lens and body LH.


5. INSTALL REAR LIGHT ASSEMBLY LH
  1. Connect the connector.

  1. Attach the clip to install the rear light assembly LH.

  1. Install the 3 nuts.

← INSTALLATION (Sep 2011 – Dec 2011)COMPONENTS (from Sep 2011) →