2011-2013 Land Cruiser · Service Manual Vehicle Exterior

INSPECTION

Inspection · Vehicles built from Sep 2011


INSPECT REAR LIGHT ASSEMBLY LH

  1. E110285E02
    Apply battery voltage to the terminals of the connector, and check the LED illumination condition.

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 3 (T/P)
    Battery negative (-) → Terminal 1 (E)
    Light illuminates

    If the result is not as specified, replace the rear light assembly.

← DISASSEMBLY (Sep 2011 – Dec 2011)REASSEMBLY (Sep 2011 – Dec 2011) →